When ever I attempt to use Synergy for the first few minutes my mouse is unable to completely enter my client screen. My client is set to the right of the server screen and when ever i drag my mouse there it enters however stays in place (touching the left edge of the screen). This is my log...
NOTE: client "JASSI-PC" has connected INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,0 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: switch from "JASSI-PC" to "JANDA-PC" at 1364,1 INFO: entering screen INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,0 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 NOTE: client "JASSI-PC" is dead INFO: jump from "JASSI-PC" to "JANDA-PC" at 683,384 INFO: entering screen NOTE: accepted client connection NOTE: client "JASSI-PC" has connected INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,540 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: switch from "JASSI-PC" to "JANDA-PC" at 1351,400 INFO: entering screen INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,426 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 NOTE: client "JASSI-PC" has disconnected INFO: jump from "JASSI-PC" to "JANDA-PC" at 683,384 INFO: entering screen NOTE: accepted client connection NOTE: client "JASSI-PC" has connected INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,585 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: switch from "JASSI-PC" to "JANDA-PC" at 1344,449 INFO: entering screen INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,366 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: switch from "JASSI-PC" to "JANDA-PC" at 1348,291 INFO: entering screen INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,407 INFO: leaving screen INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: bitmap: 1366x768 32 INFO: convert image from: depth=32 comp=3 INFO: switch from "JASSI-PC" to "JANDA-PC" at 1362,289 INFO: entering screen INFO: switch from "JANDA-PC" to "JASSI-PC" at 0,404 INFO: leaving screen <
It mentions something about converting. However after a few minutes it automatically starts working... Wht is the issue here?